These energy saving timers use n
Intermatic's Electronic Astronomic 7-Day Time Switch
automatically switches loads according switches loads according to a preset
weekly schedule with to-the-minute accuracy. The astronomic feature provides
sunset ON and sunrise OFF settings to eliminate the need for separate photo
control devices. The independent 7-Day programming provides complete flexibility
for applications where load switching differs each day of the week. Astronomic
programming can be combined with independent programs to provide a sunset ON and
timed OFF program.
- Model #: ET8215C²
- Circuits: 2
- Switch: SPST
- Clock Voltage:
- Amp Rating:
- HP Rating: 1HP/ 2HP
- Enclosure: NEMA1
Standard: NEMA1 Grey Painted Drawn Steel; 'R' Option: NEMA 3R Grey
Painted Drawn Steel; 'PD82' Option: NEMA 3R Grey-High Impact UV Resistant
Polycarbonate Plastic with Clear Cover
electronic mechanism snaps into the standard Intermatic time switch case,
replacing mechanical mechanisms, if desired.
Combination 1/2"-3/4" nominal knockouts, one on back and each side of case and
two on bottom.
and Cycles: ALL models 50 or 60 Hz.
Switch Rating :
30 Amp Inductive/Resistive, 24/120/240/277 VAC 60 Hz; 20 Amp Resistive, 28 VDC;
1 HP 120 VAC 60 Hz; 2 HP 240 VAC 60 Hz; 5 Amp Tungsten, 120/240 VAC 60 Hz; 20
Amp Ballast, 120-277 VAC 60 Hz. ET100C same ratings for 120 Volt loads only.
ET1115 models normally closed contact ratings: 10A Resistive/General Purpose,
12-277VAC; 10A Resistive/Geberal Purpose, 28 VDC; 3A Ballast, 120-277 VAC; 1/4
HP, 120 VAC; 1/2 HP, 240 VAC; 30 LRA; 12 FLA; 275 VA pilot duty, 120-240 VAC
2 Circuit models feature 2-Second pulse option for contactor and bell
Automatic Adjustment for Daylight Saving Time (DST)
Field replaceable "AAA" batteries maintain program and accurate time keeping for
3 years minimum. Up front replacement does not require removal of mechanism.
Terminals: #18 to #10 AWG wire
Times: 1 minute
Times: 6 days 23 hours 59 minutes
Models feature contacts that can be field configured to act as two independently
operated SPST, one simultaneous operated DPST, or independently pulsed SPST for
contactor and bell ringing applications.